Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 16 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
| Belt Pitch | 3/8 in |
| Hub Dia. | 1.437 in |
| Length Through Bore | 1 7/8 in |
| Hub Type | B |
| Bore Type | Rough Bore |
| Pitch Diameter | 1.91 in |
| Flange O.D. | 2.155 in |
| Material Internal Use | Atomized Metals |
| Construction Internal | Solid |
| Bushing Bore Size [Max] | 1.125 in |
| Hub Projection | 5/8 in |
| Material | Steel |
| Pitch Dia. | 1.91 in |
| Bore Range [Max] | 1 1/8 in |
| No. of Teeth | 16 |
| Teeth Face Width | 1.25 in |
| Set Screw Size | 1/4-20 x 1/4 |
| Belt Size | L |
| Belt Width | 1 in |
| Bushing Series | N/A |
| No. of Screws | 1 |
| Finished Bore | N/A |
| Bore Size [Max] | 1.125 in |
| Material External Use | Steel |
| Bore Size [Min] | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Type | DF-1 |
| Outside Dia. | 1.8800 in |
| Bore Range [Min] | 1/2 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bushing Type | None |
| Weight | 1.0 LB |
| EAN or UPC | 697950101026 |
