Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 16 Tooth
- 1/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
| Material External Use | Steel |
| Teeth Face Width | 0.563 in |
| Material Internal Use | Atomized Metals |
| No. of Screws | 2 |
| Bushing Type | None |
| Flange O.D. | 1.248 in |
| Hub Dia. | 0.687 in |
| Bore Size [Min] | 0.25 in |
| Bushing Bore Size [Min] | 0.25 in |
| Belt Size | XL |
| Bore Type | Rough Bore |
| Bore Range [Max] | 1/2 in |
| Finished Bore | N/A |
| Pitch Dia. | 1.019 in |
| Hub Type | B |
| Construction Internal | Solid |
| Belt Width | 0.375 in |
| Pitch Diameter | 1.019 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 0.218 in |
| Length Through Bore | 0.781 in |
| Bushing Series | N/A |
| Belt Pitch | 1/5 in |
| Set Screw Size | 8-32 x 1/8 |
| Bore Range [Min] | 1/4 in |
| Type | DF-1 |
| No. of Teeth | 16 |
| Outside Dia. | 0.9990 in |
| Bore Size [Max] | 0.5 in |
| Material | Steel |
| Bushing Bore Size [Max] | 0.5 in |
| Weight | 0.1 LB |
| EAN or UPC | 697950102269 |
