Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 18 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Max] | 1.5 in |
| Pitch Dia. | 2.865 in |
| No. of Teeth | 18 |
| Length Through Bore | 3.093 in |
| Bore Range [Min] | 0.75 in |
| Bushing Type | None |
| Belt Pitch | 1/2 in |
| Bore Size [Min] | 0.75 in |
| Flange O.D. | 3.097 in |
| Hardened Teeth | With Hardened Teeth |
| Outside Dia. | 2.811 in |
| Material External Use | Steel |
| Material | Steel |
| Hub Type | B |
| Teeth Face Width | 2.344 in |
| Construction Internal | Solid |
| Bushing Series | N/A |
| Belt Width | 2 in |
| Belt Size | H |
| Bushing Bore Size [Max] | 1.5 in |
| Material Internal Use | Atomized Metals |
| Bore Range [Max] | 1.5 in |
| Bushing Bore Size [Min] | 0.75 in |
| Hub Dia. | 2 in |
| Type | DF-1 |
| Pitch Diameter | 2.865 in |
| Finished Bore | N/A |
| Bore Type | Rough Bore |
| Hub Projection | 3/4 in |
| Weight | 3.7 LB |
| EAN or UPC | 697950151090 |
