Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 18 Tooth
- 3/4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material External Use | Steel |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Pitch Dia. | 2.149 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Max] | 1.188 in |
| Hub Dia. | 1.562 in |
| Type | DF-1 |
| Belt Pitch | 3/8 in |
| Belt Size | L |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 5/8 in |
| Belt Width | 0.75 in |
| Outside Dia. | 2.119 in |
| Teeth Face Width | 1 in |
| No. of Teeth | 18 |
| Hub Type | B |
| Bushing Type | None |
| Bore Type | Rough Bore |
| Bushing Series | N/A |
| Bore Size [Max] | 1.188 in |
| Construction Internal | Solid |
| Flange O.D. | 2.375 in |
| Material Internal Use | Atomized Metals |
| Bore Size [Min] | 0.5 in |
| Material | Steel |
| Pitch Diameter | 2.149 in |
| Bore Range [Max] | 1.187 in |
| Length Through Bore | 1.625 in |
| Weight | 0.9 LB |
| EAN or UPC | 697950151137 |
