Find a Service Center
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 22 Tooth
- 1/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Set Screw Size | 8-32 x 1/8 |
| Construction Internal | Solid |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 1 in |
| Hub Type | B |
| Length Through Bore | 0.94 in |
| Belt Size | XL |
| Belt Width | 0.375 in |
| Flange O.D. | 1.63 in |
| Belt Pitch | 1/5 in |
| Pitch Diameter | 1.401 in |
| Bushing Type | None |
| Bore Range [Max] | 0.75 in |
| Bushing Bore Size [Max] | 0.75 in |
| Material | Steel |
| Bushing Bore Size [Min] | 0.25 in |
| Material Internal Use | Atomized Metals |
| Bore Size [Min] | 0.25 in |
| No. of Screws | 2 |
| Type | DF-1 |
| No. of Teeth | 22 |
| Outside Dia. | 1.381 in |
| Bore Size [Max] | 0.75 in |
| Bore Type | Rough Bore |
| Hub Projection | 0.218 in |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Pitch Dia. | 1.401 in |
| Bore Range [Min] | 0.25 in |
| Teeth Face Width | 0.563 in |
| Material External Use | Steel |
| Weight | 0.22 LB |
| EAN or UPC | 697950110547 |
