Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 24 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 2.125 in |
| Bore Size [Max] | 2.125 in |
| Bushing Series | N/A |
| Flange O.D. | 4.051 in |
| Teeth Face Width | 2.344 in |
| Length Through Bore | 3.343 in |
| Belt Size | H |
| No. of Teeth | 24 |
| Material External Use | Steel |
| Finished Bore | N/A |
| Bore Range [Min] | 1 in |
| Material Internal Use | Atomized Metals |
| Bore Size [Min] | 1 in |
| Hub Type | B |
| Construction Internal | Solid |
| Bushing Type | None |
| Pitch Diameter | 3.820 in |
| Pitch Dia. | 3.82 in |
| Bushing Bore Size [Min] | 1 in |
| Hub Dia. | 3 1/8 in |
| Material | Steel |
| Hub Projection | 1 in |
| Belt Pitch | 1/2 in |
| Hardened Teeth | With Hardened Teeth |
| Outside Dia. | 3.766 in |
| Type | DF-1 |
| Bore Type | Rough Bore |
| Belt Width | 2 in |
| Bushing Bore Size [Max] | 2.125 in |
| Weight | 7.5 LB |
| EAN or UPC | 697950151540 |
