Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 24 Tooth
- 3/4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material External Use | Steel |
| Length Through Bore | 1.75 in |
| Bore Range [Min] | 0.625 in |
| Teeth Face Width | 1 in |
| No. of Teeth | 24 |
| Bore Range [Max] | 1.625 in |
| Finished Bore | N/A |
| Hub Projection | 3/4 in |
| Bushing Bore Size [Min] | 0.625 in |
| Bushing Series | N/A |
| Construction Internal | Solid |
| Pitch Dia. | 2.865 in |
| Material | Steel |
| Belt Pitch | 3/8 in |
| Material Internal Use | Atomized Metals |
| Bore Type | Rough Bore |
| Belt Size | L |
| Hub Type | B |
| Bore Size [Max] | 1.625 in |
| Bore Size [Min] | 0.625 in |
| Belt Width | 0.75 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 2 1/4 in |
| Bushing Type | None |
| Pitch Diameter | 2.865 in |
| Bushing Bore Size [Max] | 1.625 in |
| Outside Dia. | 2.835 in |
| Type | DF-1 |
| Weight | 2.1 LB |
| EAN or UPC | 697950151595 |
