Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 24 Tooth
- 3/4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Bore Size [Max] | 1.625 in |
| Bore Size [Max] | 1.625 in |
| Bore Range [Max] | 1.625 in |
| Bore Type | Rough Bore |
| No. of Teeth | 24 |
| Material | Steel |
| Pitch Diameter | 2.865 in |
| Bore Size [Min] | 0.625 in |
| Finished Bore | N/A |
| Construction Internal | Solid |
| Bushing Bore Size [Min] | 0.625 in |
| Type | DF-1 |
| Bushing Series | N/A |
| Outside Dia. | 2.835 in |
| Pitch Dia. | 2.865 in |
| Bore Range [Min] | 0.625 in |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 2 1/4 in |
| Belt Pitch | 3/8 in |
| Material External Use | Steel |
| Bushing Type | None |
| Hub Projection | 3/4 in |
| Teeth Face Width | 1 in |
| Belt Size | L |
| Belt Width | 0.75 in |
| Length Through Bore | 1.75 in |
| Material Internal Use | Atomized Metals |
| Weight | 2.1 LB |
| EAN or UPC | 697950151595 |
