Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 24 Tooth
- 3/4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 2.835 in |
| Belt Pitch | 3/8 in |
| Material | Steel |
| Bore Size [Min] | 0.625 in |
| Hub Type | B |
| Belt Width | 0.75 in |
| Bushing Bore Size [Min] | 0.625 in |
| Bore Range [Min] | 0.625 in |
| Bushing Bore Size [Max] | 1.625 in |
| Length Through Bore | 1.75 in |
| Bushing Type | None |
| Pitch Diameter | 2.865 in |
| Hub Dia. | 2 1/4 in |
| Hardened Teeth | Without Hardened Teeth |
| Belt Size | L |
| Finished Bore | N/A |
| No. of Teeth | 24 |
| Pitch Dia. | 2.865 in |
| Material Internal Use | Atomized Metals |
| Material External Use | Steel |
| Type | DF-1 |
| Teeth Face Width | 1 in |
| Bore Size [Max] | 1.625 in |
| Construction Internal | Solid |
| Bushing Series | N/A |
| Bore Type | Rough Bore |
| Bore Range [Max] | 1.625 in |
| Hub Projection | 3/4 in |
| Weight | 2.1 LB |
| EAN or UPC | 697950151595 |
