Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 26 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material External Use | Steel |
| Hub Projection | 3/4 in |
| No. of Teeth | 26 |
| Construction Internal | Solid |
| Bore Range [Max] | 1.625 in |
| Bore Type | Rough Bore |
| Material | Steel |
| Belt Size | L |
| Bushing Bore Size [Max] | 1.625 in |
| Flange O.D. | 3.328 in |
| Finished Bore | N/A |
| Material Internal Use | Atomized Metals |
| Type | DF-1 |
| Bore Range [Min] | 0.5 in |
| Bore Size [Min] | 0.5 in |
| Belt Pitch | 3/8 in |
| Outside Dia. | 3.114 in |
| Length Through Bore | 1.5 in |
| Belt Width | 0.5 in |
| Bushing Series | N/A |
| Teeth Face Width | 0.75 in |
| Pitch Dia. | 3.104 in |
| Pitch Diameter | 3.104 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Type | None |
| Hub Type | B |
| Hub Dia. | 2 1/2 in |
| Bore Size [Max] | 1.625 in |
| Weight | 2.3 LB |
| EAN or UPC | 697950151700 |
