Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 26 Tooth
- 3/4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Dia. | 3.104 in |
| Bore Type | Rough Bore |
| Material | Steel |
| Hub Projection | 7/8 in |
| Bushing Bore Size [Max] | 1.625 in |
| Bushing Series | N/A |
| Bushing Bore Size [Min] | 0.625 in |
| Teeth Face Width | 1 in |
| Bore Range [Min] | 0.625 in |
| Construction Internal | Solid |
| Bore Size [Max] | 1.625 in |
| Finished Bore | N/A |
| No. of Teeth | 26 |
| Type | DF-1 |
| Bushing Type | None |
| Belt Size | L |
| Bore Size [Min] | 0.625 in |
| Material External Use | Steel |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.875 in |
| Hub Dia. | 2 1/2 in |
| Belt Pitch | 3/8 in |
| Outside Dia. | 3.114 in |
| Belt Width | 0.75 in |
| Pitch Diameter | 3.104 in |
| Material Internal Use | Atomized Metals |
| Bore Range [Max] | 1.625 in |
| Flange O.D. | 3.328 in |
| Weight | 2.8 LB |
| EAN or UPC | 697950151724 |
