Find a Service Center
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 32 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Teeth Face Width | 0.75 in |
| Belt Width | 0.5 in |
| Material External Use | Steel |
| Material | Steel |
| Material Internal Use | Atomized Metals |
| Construction Internal | Solid |
| Hub Dia. | 3.062 in |
| Pitch Dia. | 3.82 in |
| Bore Type | Rough Bore |
| Flange O.D. | 4.044 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Min] | 0.5 in |
| Outside Dia. | 3.83 in |
| Bushing Bore Size [Max] | 1.875 in |
| Length Through Bore | 1.625 in |
| Bore Range [Max] | 1.875 in |
| Belt Pitch | 3/8 in |
| Bore Size [Max] | 1.875 in |
| Type | DF-1 |
| Bore Size [Min] | 0.5 in |
| Hub Type | B |
| Bushing Series | N/A |
| Pitch Diameter | 3.820 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bushing Type | None |
| Belt Size | L |
| Hub Projection | 7/8 in |
| No. of Teeth | 32 |
| Finished Bore | N/A |
| Weight | 3.0 LB |
| EAN or UPC | 697950152011 |
