Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 32 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L |
| Hub Type | B |
| Belt Width | 1 in |
| Bore Size [Min] | 0.625 in |
| Pitch Diameter | 3.820 in |
| Outside Dia. | 3.83 in |
| Finished Bore | N/A |
| Construction Internal | Solid |
| Material | Steel |
| Pitch Dia. | 3.82 in |
| Material External Use | Steel |
| Belt Pitch | 3/8 in |
| No. of Teeth | 32 |
| Teeth Face Width | 1.25 in |
| Bore Range [Max] | 1.875 in |
| Type | DF-1 |
| Bushing Bore Size [Max] | 1.875 in |
| Hub Projection | 1 in |
| Flange O.D. | 4.044 in |
| Hub Dia. | 3.062 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 2.25 in |
| Bore Range [Min] | 0.625 in |
| Material Internal Use | Atomized Metals |
| Bushing Type | None |
| Bore Type | Rough Bore |
| Bushing Bore Size [Min] | 0.625 in |
| Bushing Series | N/A |
| Bore Size [Max] | 1.875 in |
| Weight | 4.4 LB |
| EAN or UPC | 697950152059 |
