Find a Service Center
Alternate Products
- Timing Belt Pulley
- 7/8 in Belt Pitch
- XH Belt Size
- 32 Tooth
- 4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material External Use | Cast Iron |
| Outside Dia. | 8.806 in |
| Bushing Series | E |
| Bore Size [Max] | 8.75 in |
| Material Internal Use | Cast Iron |
| Hub Type | A |
| Belt Size | XH |
| Bore Size [Min] | 0.875 in |
| Belt Pitch | 7/8 in |
| Construction Internal | Solid |
| Belt Width | 4 in |
| Hardened Teeth | With Hardened Teeth |
| Flange O.D. | 9.437 in |
| Bore Range [Max] | 3.5 in |
| Bushing Bore Size [Max] | 8.75 in |
| Length Through Bore | 4.688 in |
| Bore Range [Min] | 0.875 in |
| Material | Cast Iron |
| Teeth Face Width | 4.688 in |
| Type | JF-1 |
| Pitch Diameter | 8.913 in |
| Pitch Dia. | 8.913 in |
| No. of Teeth | 32 |
| Finished Bore | N/A |
| Bushing Bore Size [Min] | 0.875 in |
| Bore Type | Bushed |
| Bushing Type | QD |
| Weight | 34.0 LB |
| EAN or UPC | 697950114637 |
