Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 36 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Construction Internal | Solid |
| Material External Use | Cast Iron |
| No. of Teeth | 36 |
| Type | HF-1 |
| Bore Range [Min] | 0.5 in |
| Belt Width | 2 in |
| Belt Pitch | 1/2 in |
| Pitch Dia. | 5.73 in |
| Material Internal Use | Cast Iron |
| Material | Cast Iron |
| Finished Bore | N/A |
| Bore Size [Max] | 2.625 in |
| Outside Dia. | 5.678 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Type | A |
| Flange O.D. | 5.959 in |
| Bushing Series | SK |
| Length Through Bore | 2.344 in |
| Hardened Teeth | With Hardened Teeth |
| Bore Size [Min] | 0.5 in |
| Pitch Diameter | 5.730 in |
| Belt Size | H |
| Bore Range [Max] | 2.625 in |
| Bore Type | Bushed |
| Bushing Bore Size [Max] | 2.625 in |
| Teeth Face Width | 2.344 in |
| Bushing Type | QD |
| Weight | 8.0 LB |
| EAN or UPC | 697950152097 |
