Find a Service Center
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 40 Tooth
- 1/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material Internal Use | Atomized Metals |
| Bushing Series | N/A |
| Type | D-1 |
| Hub Dia. | 1 1/2 in |
| Material External Use | Steel |
| Material | Steel |
| Outside Dia. | 2.526 in |
| No. of Screws | 2 |
| Set Screw Size | 10-24 x 3/16 |
| Finished Bore | N/A |
| Bore Size [Min] | 0.313 in |
| Hub Type | B |
| Bore Range [Max] | 1.187 in |
| Bore Size [Max] | 1.188 in |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Bore Size [Min] | 0.313 in |
| Bushing Type | None |
| Bushing Bore Size [Max] | 1.188 in |
| Belt Size | XL |
| Hub Projection | 0.218 in |
| Bore Type | Rough Bore |
| Length Through Bore | 1 in |
| Belt Pitch | 1/5 in |
| Belt Width | 0.375 in |
| No. of Teeth | 40 |
| Bore Range [Min] | 0.312 in |
| Pitch Dia. | 2.546 in |
| Construction Internal | Solid |
| Teeth Face Width | 0.563 in |
| Pitch Diameter | 2.546 in |
| Weight | 0.35 LB |
| EAN or UPC | 697950117560 |
