Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 72 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Teeth Face Width | 2.344 in |
| Construction Internal | Web |
| Bore Range [Max] | 2.9375 in |
| Belt Size | H |
| Finished Bore | N/A |
| Type | H-2 |
| Hub Dia. | 6 in |
| Hardened Teeth | With Hardened Teeth |
| Bushing Bore Size [Max] | 2.938 in |
| Outside Dia. | 11.408 in |
| Bushing Series | SF |
| Material | Cast Iron |
| Length Through Bore | 1.25 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Size [Min] | 0.5 in |
| Pitch Diameter | 11.459 in |
| Bushing Type | QD |
| Belt Width | 2 in |
| Material Internal Use | Cast Iron |
| Hub Type | A |
| Pitch Dia. | 11.459 in |
| No. of Teeth | 72 |
| Material External Use | Cast Iron |
| Bore Range [Min] | 0.5 in |
| Bore Size [Max] | 2.938 in |
| Belt Pitch | 1/2 in |
| Bore Type | Bushed |
| Weight | 25.8 LB |
| EAN or UPC | 697950122878 |
