Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 84 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Max] | 2.938 in |
| Bushing Type | QD |
| Outside Dia. | 13.318 in |
| Material Internal Use | Cast Iron |
| Belt Pitch | 1/2 in |
| Pitch Diameter | 13.369 in |
| Bushing Bore Size [Min] | 0.5 in |
| Construction Internal | Web |
| Material External Use | Cast Iron |
| No. of Teeth | 84 |
| Pitch Dia. | 13.369 in |
| Finished Bore | N/A |
| Bore Range [Max] | 2.9375 in |
| Belt Width | 2 in |
| Hub Type | A |
| Teeth Face Width | 2.344 in |
| Material | Cast Iron |
| Belt Size | H |
| Bushing Bore Size [Max] | 2.938 in |
| Length Through Bore | 1.25 in |
| Type | H-3 |
| Hardened Teeth | With Hardened Teeth |
| Hub Dia. | 6 in |
| Bushing Series | SF |
| Bore Range [Min] | 0.5 in |
| Bore Size [Min] | 0.5 in |
| Bore Type | Bushed |
| Weight | 34.0 LB |
| EAN or UPC | 697950124117 |
