Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 84 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Max] | 2 in |
| Bore Range [Max] | 2 in |
| Type | G-3 |
| Pitch Dia. | 10.027 in |
| Material | Cast Iron |
| Finished Bore | N/A |
| Pitch Diameter | 10.027 in |
| Material External Use | Cast Iron |
| Material Internal Use | Cast Iron |
| Belt Size | L |
| Hub Type | A |
| Teeth Face Width | 1.25 in |
| Outside Dia. | 10 in |
| Bushing Series | SD |
| Bore Size [Min] | 0.5 in |
| Length Through Bore | 1.25 in |
| Hub Dia. | 3 3/8 in |
| Belt Pitch | 3/8 in |
| Construction Internal | Spoked |
| No. of Teeth | 84 |
| Bore Range [Min] | 0.5 in |
| Bore Type | Bushed |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Type | QD |
| Belt Width | 1 in |
| Bushing Bore Size [Max] | 2 in |
| Bushing Bore Size [Min] | 0.5 in |
| Weight | 9.0 LB |
| EAN or UPC | 697950124155 |
