Find a Service Center
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 14 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | Taper-Lock |
| Width Across Teeth | 1.063 in |
| Bore Type | Bushed |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Material | Steel |
| Hub Type | A |
| Bore Size [Max] | 1 in |
| Teeth Face Width | 1.313 in |
| Pitch Diameter | 2.228 in |
| Length Through Bore | 0.875 in |
| Type | KF-1 |
| Bore Range [Max] | 1 in |
| Belt Size | H |
| Belt Width | 1 in |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 14 |
| Pitch Dia. | 2.228 in |
| Bushing Series | 1008 |
| Finished Bore | N/A |
| Outside Dia. | 2.174 in |
| Material Internal Use | Atomized Metals |
| Material External Use | Steel |
| Belt Pitch | 1/2 in |
| Flange O.D. | 2.461 in |
| Bushing Bore Size [Max] | 1 in |
| Weight | 0.8 LB |
| EAN or UPC | 697950083100 |
