Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 14 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Bore Size [Max] | 1 in |
| Bore Range [Max] | 1 in |
| Hub Type | A |
| Hub Projection | 0.437 in |
| Bore Type | Bushed |
| Bore Range [Min] | 0.5 in |
| Bore Size [Min] | 0.5 in |
| Teeth Face Width | 1.813 in |
| Material Internal Use | Atomized Metals |
| Belt Size | H |
| No. of Teeth | 14 |
| Outside Dia. | 2.174 in |
| Width Across Teeth | 1.563 in |
| Type | KF-1 |
| Material External Use | Steel |
| Material | Steel |
| Belt Width | 1.5 in |
| Pitch Dia. | 2.228 in |
| Pitch Diameter | 2.228 in |
| Bushing Type | Taper-Lock |
| Bore Size [Max] | 1 in |
| Bushing Series | 1008 |
| Bushing Bore Size [Min] | 0.5 in |
| Flange O.D. | 2.461 in |
| Length Through Bore | 0.875 in |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| Construction Internal | Solid |
| Weight | 1.0 LB |
| EAN or UPC | 697950083117 |
