Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 16 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | Taper-Lock |
| Material External Use | Steel |
| Construction Internal | Solid |
| Bore Size [Max] | 1 in |
| Hub Projection | 0.437 in |
| Flange O.D. | 2.779 in |
| Outside Dia. | 2.492 in |
| Bore Range [Min] | 0.5 in |
| Teeth Face Width | 1.313 in |
| Hub Type | A |
| Material | Steel |
| Bore Range [Max] | 1 in |
| Belt Size | H |
| Width Across Teeth | 1.063 in |
| Pitch Dia. | 2.546 in |
| Bushing Bore Size [Min] | 0.5 in |
| Length Through Bore | 0.875 in |
| Material Internal Use | Atomized Metals |
| Bore Size [Min] | 0.5 in |
| Type | KF-1 |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| Pitch Diameter | 2.546 in |
| Bushing Series | 1008 |
| Belt Width | 1 in |
| Bushing Bore Size [Max] | 1 in |
| No. of Teeth | 16 |
| Bore Type | Bushed |
| Weight | 1.3 LB |
| EAN or UPC | 697950083124 |
