Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 18 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 1210 |
| No. of Teeth | 18 |
| Hub Projection | 0.312 in |
| Belt Size | H |
| Material | Steel |
| Bushing Bore Size [Max] | 1.26 in |
| Length Through Bore | 1 in |
| Bore Range [Min] | 0.5 in |
| Width Across Teeth | 1.063 in |
| Flange O.D. | 3.097 in |
| Pitch Diameter | 2.865 in |
| Bore Type | Bushed |
| Construction Internal | Solid |
| Belt Width | 1 in |
| Bore Range [Max] | 1.25 in |
| Material External Use | Steel |
| Outside Dia. | 2.811 in |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Belt Pitch | 1/2 in |
| Material Internal Use | Atomized Metals |
| Bore Size [Max] | 1.26 in |
| Hub Type | A |
| Type | KF-1 |
| Finished Bore | N/A |
| Pitch Dia. | 2.865 in |
| Bushing Type | Taper-Lock |
| Teeth Face Width | 1.313 in |
| Weight | 1.2 LB |
| EAN or UPC | 697950083162 |
