Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 18 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Bore Size [Min] | 0.5 in |
| Bushing Type | Taper-Lock |
| Length Through Bore | 1 in |
| Bore Range [Max] | 1.25 in |
| Belt Size | H |
| Width Across Teeth | 1.063 in |
| Belt Width | 1 in |
| Hub Type | A |
| Type | KF-1 |
| Bore Size [Max] | 1.26 in |
| Material External Use | Steel |
| Bore Range [Min] | 0.5 in |
| Flange O.D. | 3.097 in |
| Hub Projection | 0.312 in |
| Bushing Bore Size [Max] | 1.26 in |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| Pitch Dia. | 2.865 in |
| Construction Internal | Solid |
| Bore Size [Min] | 0.5 in |
| Pitch Diameter | 2.865 in |
| Bore Type | Bushed |
| Teeth Face Width | 1.313 in |
| Material | Steel |
| No. of Teeth | 18 |
| Bushing Series | 1210 |
| Material Internal Use | Atomized Metals |
| Outside Dia. | 2.811 in |
| Weight | 1.2 LB |
| EAN or UPC | 697950083162 |
