Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 18 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| No. of Teeth | 18 |
| Material | Steel |
| Bushing Bore Size [Max] | 1.25 in |
| Length Through Bore | 1.5 in |
| Material Internal Use | Atomized Metals |
| Material External Use | Steel |
| Belt Size | H |
| Pitch Diameter | 2.865 in |
| Width Across Teeth | 1.563 in |
| Belt Pitch | 1/2 in |
| Pitch Dia. | 2.865 in |
| Teeth Face Width | 1.813 in |
| Bore Range [Min] | 0.5 in |
| Hub Type | A |
| Hub Projection | 0.312 in |
| Bore Range [Max] | 1.25 in |
| Finished Bore | N/A |
| Outside Dia. | 2.811 in |
| Bushing Series | 1215 |
| Belt Width | 1.5 in |
| Type | KF-1 |
| Bore Type | Bushed |
| Bore Size [Max] | 1.25 in |
| Bushing Type | Taper-Lock |
| Flange O.D. | 3.097 in |
| Bushing Bore Size [Min] | 0.5 in |
| Weight | 1.6 LB |
| EAN or UPC | 697950083179 |
