Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 18 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Dia. | 2.865 in |
| Hub Projection | 0.812 in |
| Bore Size [Max] | 1.25 in |
| Type | KF-1 |
| Bushing Type | Taper-Lock |
| Belt Size | H |
| Material External Use | Steel |
| Bushing Bore Size [Max] | 1.25 in |
| Hub Type | A |
| Material | Steel |
| Material Internal Use | Atomized Metals |
| No. of Teeth | 18 |
| Bore Range [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Belt Pitch | 1/2 in |
| Flange O.D. | 3.097 in |
| Bore Size [Min] | 0.5 in |
| Width Across Teeth | 2.093 in |
| Bore Range [Max] | 1.25 in |
| Pitch Diameter | 2.865 in |
| Bushing Series | 1215 |
| Belt Width | 2 in |
| Finished Bore | N/A |
| Outside Dia. | 2.811 in |
| Bore Type | Bushed |
| Teeth Face Width | 2.344 in |
| Length Through Bore | 1.5 in |
| Weight | 1.8 LB |
| EAN or UPC | 697950083186 |
