Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 18 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Teeth Face Width | 0.75 in |
| Type | CF-1 |
| Length Through Bore | 0.875 in |
| Construction Internal | Solid |
| Bore Size [Max] | 1 in |
| Material Internal Use | Atomized Metals |
| Bore Range [Max] | 1 in |
| Bore Size [Min] | 0.5 in |
| Hub Type | B |
| Material External Use | Steel |
| Belt Width | 0.5 in |
| Bushing Bore Size [Max] | 1 in |
| Belt Pitch | 3/8 in |
| Outside Dia. | 2.119 in |
| Bushing Series | 1008 |
| No. of Teeth | 18 |
| Belt Size | L |
| Pitch Diameter | 2.149 in |
| Hub Projection | 1/8 in |
| Bushing Type | Taper-Lock |
| Bore Type | Bushed |
| Pitch Dia. | 2.149 in |
| Width Across Teeth | 0.563 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Dia. | 1 5/8 in |
| Flange O.D. | 2.375 in |
| Material | Steel |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Weight | 0.45 LB |
| EAN or UPC | 697950083209 |
