Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 20 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Dia. | 3.183 in |
| Belt Width | 1.5 in |
| Material External Use | Steel |
| Hub Type | A |
| Bore Size [Max] | 1.25 in |
| Teeth Face Width | 1.813 in |
| Finished Bore | N/A |
| Outside Dia. | 3.129 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 20 |
| Width Across Teeth | 1.563 in |
| Bore Size [Min] | 0.5 in |
| Type | KF-1 |
| Belt Pitch | 1/2 in |
| Material Internal Use | Atomized Metals |
| Bushing Bore Size [Max] | 1.25 in |
| Bushing Series | 1215 |
| Flange O.D. | 3.415 in |
| Length Through Bore | 1.5 in |
| Bore Type | Bushed |
| Pitch Diameter | 3.183 in |
| Hub Projection | 0.312 in |
| Belt Size | H |
| Construction Internal | Solid |
| Material | Steel |
| Bore Range [Max] | 1.25 in |
| Bushing Type | Taper-Lock |
| Weight | 2.2 LB |
| EAN or UPC | 697950083247 |
