Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 20 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 1008 |
| Bore Range [Max] | 1 in |
| Bore Size [Min] | 0.5 in |
| Teeth Face Width | 1.25 in |
| Material External Use | Steel |
| Outside Dia. | 2.357 in |
| Flange O.D. | 2.613 in |
| Bushing Bore Size [Max] | 1 in |
| Hub Projection | 1/4 in |
| No. of Teeth | 20 |
| Hub Type | A |
| Width Across Teeth | 1.063 in |
| Bushing Type | Taper-Lock |
| Construction Internal | Solid |
| Pitch Dia. | 2.387 in |
| Material | Steel |
| Belt Size | L |
| Belt Width | 1 in |
| Pitch Diameter | 2.387 in |
| Finished Bore | N/A |
| Bore Type | Bushed |
| Type | KF-1 |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 0.875 in |
| Belt Pitch | 3/8 in |
| Bore Size [Max] | 1 in |
| Material Internal Use | Atomized Metals |
| Weight | 1.0 LB |
| EAN or UPC | 697950083292 |
