Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 22 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Flange O.D. | 2.852 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Size [Max] | 1 in |
| Bore Size [Min] | 0.5 in |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 3/8 in |
| Bushing Bore Size [Max] | 1 in |
| Bushing Type | Taper-Lock |
| Outside Dia. | 2.596 in |
| Width Across Teeth | 0.812 in |
| Belt Size | L |
| Material | Steel |
| Construction Internal | Solid |
| Bore Type | Bushed |
| Teeth Face Width | 1 in |
| No. of Teeth | 22 |
| Belt Width | 0.75 in |
| Bushing Series | 1008 |
| Type | KF-1 |
| Pitch Dia. | 2.626 in |
| Bore Range [Max] | 1 in |
| Length Through Bore | 0.875 in |
| Material External Use | Steel |
| Material Internal Use | Atomized Metals |
| Finished Bore | N/A |
| Pitch Diameter | 2.626 in |
| Hub Type | A |
| Hub Projection | 1/8 in |
| Weight | 0.9 LB |
| EAN or UPC | 697950083353 |
