Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 24 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1 in |
| Construction Internal | Solid |
| Flange O.D. | 4.051 in |
| Pitch Diameter | 3.82 in |
| Bushing Type | Taper-Lock |
| Material Internal Use | Atomized Metals |
| Teeth Face Width | 1.313 in |
| Hub Type | A |
| Belt Size | H |
| Bore Size [Min] | 0.5 in |
| Belt Pitch | 1/2 in |
| Bushing Bore Size [Max] | 2 in |
| Material | Steel |
| Outside Dia. | 3.766 in |
| Belt Width | 1 in |
| Finished Bore | N/A |
| Bore Range [Max] | 2 in |
| Bushing Series | 2012 |
| Pitch Dia. | 3.82 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Projection | 0.312 in |
| Bore Range [Min] | 0.5 in |
| Width Across Teeth | 1.063 in |
| Material External Use | Steel |
| Bore Type | Bushed |
| Type | KF-1 |
| Bore Size [Max] | 2 in |
| No. of Teeth | 24 |
| Weight | 2.3 LB |
| EAN or UPC | 697950083391 |
