Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 24 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Material External Use | Steel |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Projection | 0.562 in |
| Width Across Teeth | 1.563 in |
| Material | Steel |
| Bushing Type | Taper-Lock |
| Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Bore Range [Max] | 2 in |
| Bushing Bore Size [Max] | 2 in |
| Outside Dia. | 3.766 in |
| Pitch Diameter | 3.82 in |
| Flange O.D. | 4.051 in |
| Belt Pitch | 1/2 in |
| Belt Width | 1.5 in |
| Material Internal Use | Atomized Metals |
| Teeth Face Width | 1.813 in |
| Length Through Bore | 1.25 in |
| Hub Type | A |
| Bore Size [Max] | 2 in |
| Bore Type | Bushed |
| Bushing Series | 2012 |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Pitch Dia. | 3.82 in |
| Type | KF-1 |
| No. of Teeth | 24 |
| Weight | 2.7 LB |
| EAN or UPC | 697950083407 |
