Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 24 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| Teeth Face Width | 1.813 in |
| Belt Pitch | 1/2 in |
| Outside Dia. | 3.766 in |
| Finished Bore | N/A |
| Width Across Teeth | 1.563 in |
| Bore Range [Min] | 0.5 in |
| Pitch Dia. | 3.82 in |
| Belt Size | H |
| Belt Width | 1.5 in |
| Flange O.D. | 4.051 in |
| Bushing Type | Taper-Lock |
| Material External Use | Steel |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Type | A |
| Bushing Bore Size [Max] | 2 in |
| Length Through Bore | 1.25 in |
| Bore Size [Max] | 2 in |
| Material Internal Use | Atomized Metals |
| Bushing Series | 2012 |
| Bore Type | Bushed |
| Bore Range [Max] | 2 in |
| No. of Teeth | 24 |
| Pitch Diameter | 3.82 in |
| Hub Projection | 0.562 in |
| Type | KF-1 |
| Construction Internal | Solid |
| Weight | 2.7 LB |
| EAN or UPC | 697950083407 |
