Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 24 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | A |
| Bore Size [Min] | 0.5 in |
| Belt Size | L |
| Bushing Type | Taper-Lock |
| Width Across Teeth | 1.063 in |
| Bore Type | Bushed |
| Material | Steel |
| No. of Teeth | 24 |
| Type | KF-1 |
| Material Internal Use | Atomized Metals |
| Bushing Bore Size [Max] | 1.26 in |
| Outside Dia. | 2.835 in |
| Material External Use | Steel |
| Length Through Bore | 1 in |
| Bore Range [Max] | 1.25 in |
| Pitch Diameter | 2.865 in |
| Finished Bore | N/A |
| Bore Size [Max] | 1.26 in |
| Hub Projection | 1/4 in |
| Belt Pitch | 3/8 in |
| Bushing Series | 1210 |
| Bore Range [Min] | 0.5 in |
| Pitch Dia. | 2.865 in |
| Construction Internal | Solid |
| Flange O.D. | 3.08 in |
| Belt Width | 1 in |
| Bushing Bore Size [Min] | 0.5 in |
| Teeth Face Width | 1.25 in |
| Weight | 1.3 LB |
| EAN or UPC | 697950083452 |
