Find a Service Center
Alternate Products
- Timing Belt Pulley
- 7/8 in Belt Pitch
- XH Belt Size
- 24 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 7/8 in |
| Belt Width | 3 in |
| Material Internal Use | Cast Iron |
| Bore Range [Max] | 3 in |
| Belt Size | XH |
| Finished Bore | N/A |
| Teeth Face Width | 3.625 in |
| Outside Dia. | 6.575 in |
| Bore Type | Bushed |
| Bore Size [Min] | 0.938 in |
| Pitch Dia. | 6.685 in |
| Bore Range [Min] | 0.875 in |
| Pitch Diameter | 6.685 in |
| Hub Type | A |
| Construction Internal | Solid |
| Material | Cast Iron |
| Bushing Bore Size [Min] | 0.938 in |
| No. of Teeth | 24 |
| Length Through Bore | 2 in |
| Type | KF-1 |
| Width Across Teeth | 3.313 in |
| Material External Use | Cast Iron |
| Bushing Series | 3020 |
| Bushing Bore Size [Max] | 3 in |
| Flange O.D. | 7.218 in |
| Bore Size [Max] | 3 in |
| Bushing Type | Taper-Lock |
| Weight | 15.3 LB |
| EAN or UPC | 697950083476 |
