Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 26 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 1 in |
| Outside Dia. | 4.084 in |
| Belt Size | H |
| Material | Steel |
| Pitch Dia. | 4.138 in |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 0.062 in |
| Bushing Type | Taper-Lock |
| Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Length Through Bore | 1.25 in |
| Teeth Face Width | 1.313 in |
| Bushing Bore Size [Min] | 0.5 in |
| Finished Bore | N/A |
| Type | KF-1 |
| Belt Pitch | 1/2 in |
| No. of Teeth | 26 |
| Hub Type | A |
| Material Internal Use | Atomized Metals |
| Bore Range [Max] | 2 in |
| Bore Size [Max] | 2 in |
| Width Across Teeth | 1.063 in |
| Bore Type | Bushed |
| Flange O.D. | 4.369 in |
| Bushing Bore Size [Max] | 2 in |
| Bushing Series | 2012 |
| Pitch Diameter | 4.138 in |
| Material External Use | Steel |
| Weight | 2.4 LB |
| EAN or UPC | 697950083483 |
