Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 26 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 0.5 in |
| Hub Type | A |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| No. of Teeth | 26 |
| Teeth Face Width | 3.375 in |
| Belt Width | 3 in |
| Flange O.D. | 4.369 in |
| Length Through Bore | 2.313 in |
| Type | KF-1 |
| Construction Internal | Solid |
| Outside Dia. | 4.084 in |
| Bore Size [Min] | 0.5 in |
| Pitch Diameter | 4.138 in |
| Material | Steel |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Range [Max] | 2 in |
| Bore Type | Bushed |
| Belt Size | H |
| Width Across Teeth | 3.125 in |
| Bushing Series | 2012 |
| Pitch Dia. | 4.138 in |
| Bushing Bore Size [Max] | 2 in |
| Material External Use | Steel |
| Bore Size [Max] | 2 in |
| Material Internal Use | Carbon Steel |
| Bushing Type | Taper-Lock |
| Weight | 5.4 LB |
| EAN or UPC | 697950083513 |
