Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 28 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Teeth Face Width | 1.25 in |
| Material External Use | Steel |
| Hub Projection | 1/4 in |
| Bushing Bore Size [Min] | 0.5 in |
| Type | KF-1 |
| Material Internal Use | Atomized Metals |
| Width Across Teeth | 1.063 in |
| Material | Steel |
| Outside Dia. | 3.312 in |
| Bushing Series | 1610 |
| Flange O.D. | 3.566 in |
| Belt Pitch | 3/8 in |
| No. of Teeth | 28 |
| Pitch Diameter | 3.342 in |
| Bore Range [Max] | 1.625 in |
| Bore Size [Max] | 1.625 in |
| Bore Size [Min] | 0.5 in |
| Bore Type | Bushed |
| Pitch Dia. | 3.342 in |
| Finished Bore | N/A |
| Bushing Bore Size [Max] | 1.625 in |
| Belt Width | 1 in |
| Length Through Bore | 1 in |
| Hub Type | A |
| Belt Size | L |
| Bore Range [Min] | 0.5 in |
| Construction Internal | Solid |
| Bushing Type | Taper-Lock |
| Weight | 1.7 LB |
| EAN or UPC | 697950083636 |
