Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 30 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | Taper-Lock |
| Width Across Teeth | 1.062 in |
| Construction Internal | Solid |
| Belt Pitch | 1/2 in |
| Teeth Face Width | 1.313 in |
| Length Through Bore | 1.313 in |
| Bushing Series | 2012 |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Range [Min] | 0.5 in |
| Pitch Diameter | 4.775 in |
| Hub Type | A |
| Material External Use | Cast Iron |
| Outside Dia. | 4.721 in |
| Material | Cast Iron |
| Belt Size | H |
| Bore Size [Min] | 0.5 in |
| Bore Size [Max] | 2 in |
| Type | KF-1 |
| Pitch Dia. | 4.775 in |
| No. of Teeth | 30 |
| Bore Type | Bushed |
| Material Internal Use | Cast Iron |
| Finished Bore | N/A |
| Bushing Bore Size [Max] | 2 in |
| Belt Width | 1 in |
| Flange O.D. | 5.005 in |
| Bore Range [Max] | 2 in |
| Weight | 3.9 LB |
| EAN or UPC | 697950083667 |
