Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 30 Tooth
- 1 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 1/2 in |
| Outside Dia. | 4.721 in |
| Type | KF-1 |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Type | A |
| Material External Use | Cast Iron |
| Belt Width | 1.5 in |
| Construction Internal | Solid |
| No. of Teeth | 30 |
| Bushing Series | 2012 |
| Bore Type | Bushed |
| Teeth Face Width | 1.813 in |
| Pitch Dia. | 4.775 in |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Max] | 2 in |
| Bushing Type | Taper-Lock |
| Width Across Teeth | 1.563 in |
| Belt Size | H |
| Flange O.D. | 5.005 in |
| Length Through Bore | 1.25 in |
| Material | Cast Iron |
| Bore Range [Min] | 0.5 in |
| Material Internal Use | Cast Iron |
| Bore Size [Max] | 2 in |
| Pitch Diameter | 4.775 in |
| Weight | 5.21 LB |
| EAN or UPC | 697950083674 |
