Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 32 Tooth
- 1 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Length Through Bore | 1.813 in |
| Outside Dia. | 5.039 in |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Material Internal Use | Cast Iron |
| Belt Pitch | 1/2 in |
| Type | KF-1 |
| Belt Width | 1.5 in |
| Hub Type | A |
| No. of Teeth | 32 |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Max] | 2.5 in |
| Bushing Series | 2517 |
| Bushing Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Width Across Teeth | 1.563 in |
| Bore Size [Max] | 2.5 in |
| Material | Cast Iron |
| Finished Bore | N/A |
| Pitch Dia. | 5.093 in |
| Pitch Diameter | 5.093 in |
| Material External Use | Cast Iron |
| Bore Range [Max] | 2.5 in |
| Bore Range [Min] | 0.5 in |
| Flange O.D. | 5.323 in |
| Teeth Face Width | 1.813 in |
| Weight | 6.01 LB |
| EAN or UPC | 697950083766 |
