Find a Service Center
Alternate Products
- Timing Belt Pulley
- 7/8 in Belt Pitch
- XH Belt Size
- 32 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 3.313 in |
| Outside Dia. | 8.803 in |
| Construction Internal | Solid |
| Pitch Dia. | 8.913 in |
| Finished Bore | N/A |
| Material External Use | Cast Iron |
| Material Internal Use | Cast Iron |
| Hub Type | A |
| Teeth Face Width | 3.625 in |
| Bore Range [Min] | 1.1875 in |
| Flange O.D. | 9.437 in |
| Bore Range [Max] | 3.5 in |
| Bore Size [Min] | 1.188 in |
| Bushing Type | Taper-Lock |
| Belt Size | XH |
| Belt Width | 3 in |
| No. of Teeth | 32 |
| Bushing Series | 3535 |
| Pitch Diameter | 8.913 in |
| Bushing Bore Size [Max] | 3.5 in |
| Belt Pitch | 7/8 in |
| Length Through Bore | 3.5 in |
| Bore Size [Max] | 3.5 in |
| Material | Cast Iron |
| Bore Type | Bushed |
| Bushing Bore Size [Min] | 1.188 in |
| Type | KF-1 |
| Weight | 34.81 LB |
| EAN or UPC | 697950083834 |
