Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 40 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material External Use | Cast Iron |
| Pitch Diameter | 6.366 in |
| Bushing Type | Taper-Lock |
| Bushing Bore Size [Min] | 0.5 in |
| Length Through Bore | 1.75 in |
| Hub Projection | 0.188 in |
| Teeth Face Width | 1.313 in |
| Bushing Bore Size [Max] | 2.5 in |
| Material | Cast Iron |
| Type | CF-1 |
| Material Internal Use | Cast Iron |
| Width Across Teeth | 1.063 in |
| Finished Bore | N/A |
| No. of Teeth | 40 |
| Flange O.D. | 6.595 in |
| Hub Dia. | 4.437 in |
| Bushing Series | 2517 |
| Bore Size [Max] | 2.5 in |
| Belt Width | 1 in |
| Hub Type | B |
| Bore Size [Min] | 0.5 in |
| Outside Dia. | 6.312 in |
| Bore Type | Bushed |
| Bore Range [Max] | 2.5 in |
| Belt Pitch | 1/2 in |
| Belt Size | H |
| Pitch Dia. | 6.366 in |
| Construction Internal | Solid |
| Bore Range [Min] | 0.5 in |
| Weight | 7.8 LB |
| EAN or UPC | 697950083841 |
