Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 40 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Flange O.D. | 6.595 in |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Pitch Diameter | 6.366 in |
| Bore Range [Max] | 2.5 in |
| Bore Size [Max] | 2.5 in |
| Bore Type | Bushed |
| Type | KF-1 |
| Material | Cast Iron |
| Bushing Series | 2517 |
| Belt Size | H |
| Width Across Teeth | 2.094 in |
| Construction Internal | Solid |
| Teeth Face Width | 2.344 in |
| No. of Teeth | 40 |
| Pitch Dia. | 6.366 in |
| Bore Size [Min] | 0.5 in |
| Bushing Type | Taper-Lock |
| Material Internal Use | Cast Iron |
| Material External Use | Cast Iron |
| Belt Width | 2 in |
| Bushing Bore Size [Max] | 2.5 in |
| Hub Type | A |
| Bushing Bore Size [Min] | 0.5 in |
| Belt Pitch | 1/2 in |
| Length Through Bore | 1.75 in |
| Outside Dia. | 6.312 in |
| Weight | 9.9 LB |
| EAN or UPC | 697950083865 |
