Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 48 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material Internal Use | Carbon Steel |
| Outside Dia. | 7.585 in |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Teeth Face Width | 1.313 in |
| Type | CF-1 |
| Bushing Type | Taper-Lock |
| Hub Dia. | 4.437 in |
| No. of Teeth | 48 |
| Flange O.D. | 7.867 in |
| Hub Type | B |
| Belt Width | 1 in |
| Pitch Dia. | 7.639 in |
| Bore Size [Max] | 2.5 in |
| Bore Range [Max] | 2.5 in |
| Finished Bore | N/A |
| Bushing Bore Size [Max] | 2.5 in |
| Hub Projection | 0.437 in |
| Construction Internal | Solid |
| Material External Use | Steel |
| Pitch Diameter | 7.639 in |
| Material | Steel |
| Belt Size | H |
| Length Through Bore | 1.75 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2517 |
| Bore Type | Bushed |
| Belt Pitch | 1/2 in |
| Width Across Teeth | 1.063 in |
| Weight | 12.1 LB |
| EAN or UPC | 697950083933 |
