Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 48 Tooth
- 1 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Diameter | 7.639 in |
| Width Across Teeth | 1.563 in |
| Teeth Face Width | 1.813 in |
| Bushing Bore Size [Max] | 2.5 in |
| Belt Pitch | 1/2 in |
| Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Length Through Bore | 1.813 in |
| Bushing Type | Taper-Lock |
| Flange O.D. | 7.867 in |
| No. of Teeth | 48 |
| Outside Dia. | 7.585 in |
| Material External Use | Cast Iron |
| Bushing Series | 2517 |
| Pitch Dia. | 7.639 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Bore Range [Max] | 2.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Material Internal Use | Cast Iron |
| Bore Range [Min] | 0.5 in |
| Bore Size [Max] | 2.5 in |
| Belt Size | H |
| Material | Cast Iron |
| Type | AF-2 |
| Belt Width | 1.5 in |
| Hub Type | A |
| Weight | 13.71 LB |
| EAN or UPC | 697950083940 |
