Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 60 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Construction Internal | Solid |
| Length Through Bore | 2 in |
| Bushing Bore Size [Min] | 0.938 in |
| Pitch Diameter | 9.549 in |
| Bushing Type | Taper-Lock |
| Bore Type | Bushed |
| Material | Steel |
| Outside Dia. | 9.495 in |
| Material External Use | Steel |
| Hub Type | B |
| Bushing Series | 3020 |
| Material Internal Use | Cast Iron |
| Bore Size [Min] | 0.938 in |
| Bore Size [Max] | 3 in |
| Teeth Face Width | 1.313 in |
| No. of Teeth | 60 |
| Belt Width | 1 in |
| Pitch Dia. | 9.549 in |
| Finished Bore | N/A |
| Hub Projection | 0.343 in |
| Bore Range [Max] | 3 in |
| Type | C-2 |
| Width Across Teeth | 1.3125 in |
| Hub Dia. | 6 1/4 in |
| Bore Range [Min] | 0.875 in |
| Bushing Bore Size [Max] | 3 in |
| Belt Pitch | 1/2 in |
| Belt Size | H |
| Weight | 21.9 LB |
| EAN or UPC | 697950084022 |
