Find a Service Center
Alternate Products
- 35 mm Inside Diameter
- 72 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Precision | Standard |
| Outer Ring Width | 17 mm |
| Snap Ring | No |
| I.D. | 35 mm |
| Bore Type | Straight |
| Capacity | Maximum Capacity |
| Preload Level | None |
| Cage Type | Metal |
| Internal Clearance | C3 |
| Material | Steel |
| Static Load Rating [Max] | 22100 N |
| Enclosure | Open |
| Inch/Metric | Metric Bore |
| Contact Angle | 0° |
| Corner Radius [Min] | 1.1 mm |
| O.D. Type | Straight |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial and Deep Groove |
| Closure Type | Open |
| Dynamic Load Rating | 27800 N |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| O.D. | 72 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Locking Device | No Locking Device |
| icNumber | 7696613 |
| Seal Material | None |
| Width | 17.000 mm |
| Cage Material | Pressed Steel |
| Limiting Speed - Oil | 11000 rpm |
| Series | BL2 |
| Limiting Speed - Grease | 9000 rpm |
| Radial Internal Clearance | Normal |
| Weight | 0.661 LB |
| EAN or UPC | 29176000058 |
