Find a Service Center
Alternate Products
- 35 mm Inside Diameter
- 72 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Limiting Speed - Oil | 11000 rpm |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 9000 rpm |
| Seal Type | Unsealed |
| Radial Internal Clearance Specification | Normal Clearance |
| Material | Steel |
| Corner Radius [Min] | 1.1 mm |
| Contact Angle | 0° |
| Bore Type | Straight |
| Ball Material | Steel |
| Cage Material | Pressed Steel |
| I.D. | 35 mm |
| Cage Type | Metal |
| Precision | Standard |
| O.D. | 72 mm |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | Yes |
| icNumber | 7704726 |
| Enclosure | Open |
| Bearing Type | Radial and Deep Groove |
| Rows of Balls | Single |
| Closure Type | Open |
| Seal Material | None |
| O.D. Type | Straight w/ Snap Ring |
| Preload Level | None |
| Inch/Metric | Metric Bore |
| Outer Ring Width | 17 mm |
| Capacity | Maximum Capacity |
| Series | BL2 |
| Dynamic Load Rating | 27800 N |
| Width | 17.000 mm |
| Internal Clearance | C3 |
| Radial Internal Clearance | Normal |
| Static Load Rating [Max] | 22100 N |
| Weight | 0.661 LB |
| EAN or UPC | 29176000065 |
