Find a Service Center
- 40 mm Inside Diameter
- 80 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Static Load Rating [Max] | 28800 N |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Seal Material | None |
| Rows of Balls | Single |
| Bore Type | Straight |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| O.D. | 80 mm |
| Series | BL2 |
| Internal Clearance | C0 |
| Inch/Metric | Metric Bore |
| Capacity | Maximum Capacity |
| Dynamic Load Rating | 35500 N |
| Limiting Speed - Oil | 9500 rpm |
| Width | 18.000 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Enclosure | Open |
| Precision | Standard |
| Bearing Type | Radial and Deep Groove |
| Ball Material | Steel |
| O.D. Type | Straight |
| Limiting Speed - Grease | 8000 rpm |
| Material | Steel |
| Outer Ring Width | 18 mm |
| Contact Angle | 0° |
| Closure Type | Open |
| I.D. | 40 mm |
| Cage Material | Pressed Steel |
| Radial Internal Clearance | Normal |
| Corner Radius [Min] | 1.1 mm |
| Seal Type | Unsealed |
| Snap Ring | No |
| Weight | 0.849 LB |
| EAN or UPC | 29176038891 |
